Retired - At a Gallop Necklace

PROJECT N1044
Designer: Megan Milliken
Skill Level: Beginner
A pretty pony pendant hangs from a green waxed cotton cord, with a black finish pewter heart charm below in this sweet little necklace.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Place a black finish pewter scroll heart bead onto a 1.5", 21 gauge gun metal head pin and create a simple wire loop.
  2. Cut a 2' length of bottle green 1mm waxed cotton cord. String the heart charm onto the center of the cord, then thread both ends back up through the bottom of a Green Girl Studios jumping pony focal bead. Pull the cord almost all the way up, leaving just a bit below the pony where the heart is hanging.
  3. Make an overhand knot about 1/2" from each end of the cord. Cut another piece of cord 1' long. Use the new piece of cord to create a sliding knot clasp as demonstrated in this video. Place a dab of E6000 glue into the final knot as shown, and trim the ends of the knotted cord after the glue has dried.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BMB-9151 - Green Girl Studios Focal Bead, 28mm Jumping Pony, 1 Piece, Pewter
    Project uses 1 piece. You will need 1 package.

  • BMB-5628 - TierraCast Black Finish Lead-Free Pewter Scroll Puff Heart Beads 10mm (2)
    Project uses 1 piece. You will need 1 package.

  • XCR-4316 -
    Project uses 3 feet. You will need 1 package.

  • FHP-6318 - Gun Metal Plated Head Pins 1.5 Inches/21 Gauge (50)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
Additional Information
Ingredients XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

/ Package | SKU: XTL-5700

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed