Retired - Annabelle Hair Pin

PROJECT H1000
Designer: Megan Milliken
Skill Level: Beginner
Give your up-do dramatic elegance with this hairpin, featuring pale pink and white lucite flowers and Austrian crystal accents.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Begin by using a pair of flush cutters to cut your silver plated teardrop krinkle chain into lengths that measure 2 1/2", 2", 1 1/2", and 1".
  2. Next, place one 4mm rosaline Austrian crystal crystal bicone bead onto a 1.5", 22 gauge silver plated head pin. Create a simple wire loop about 1/2" above the crystal bead. Repeat with three more head pins. It is pretty if you have the finished lengths of your head pins slightly different, by about 1/8". See photo for reference.
  3. Hang two of the head pins with beads from one 1.5", 22 gauge silver plated eye pin. Thread the eye pin through a 15mm crystal frost white lucite bell flower and then through a 20mm light rose pink lucite bell flower, stacking the lucite flowers together.
  4. Take a silver plated cone flower bead cap and gently bend the petals in with your fingers to make the shape more cone-like. Slide the bead cap onto the eye pin and down onto the back of the 20mm pink lucite flower. Create a wrapped wire loop after the bead cap.
  5. Repeat steps 3 and 4 to create a second flower bunch.
  6. Place a 4mm crystal Austrian crystal bicone bead onto a 1.5" head pin. Then thread the head pin through a 10mm rose lucite bell flower and then through a 15mm crystal frost white lucite bell flower.
  7. Take a silver plated cone flower bead cap and gently bend the petals in with your fingers to make the shape more cone-like. Slide the bead cap onto the eye pin and down onto the back of the 15mm crystal frost white lucite flower. Create a wrapped wire loop after the bead cap.
  8. Repeat steps 6 and 7 to create a second flower bunch.
  9. Use a 3mm silver plated jump ring to hang one of the larger flower bunches from the 2 1/2" length of chain, making sure that you loop the jump ring through the larger end of the chain link. Repeat this process with the other large flower bunch and the 1 1/2" length of chain.
  10. Use a 3mm jump ring to hang one of the smaller flower bunches from the 2" length of chain, through the larger end of the chain link. Repeat this process with the second small flower bunch and the 1" length of chain.
  11. Use a 4mm, 22 gauge jump ring to hang the loose end of all four chains from the loop on a silver plated 4" hair pin.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BCP-4332 - Lucite Bell Flowers Matte Ligtht Rose Pink Light Weight 20mm (4)
    Project uses 2 pieces. You will need 1 package.

  • BCP-4348 - Lucite Bell Flowers Matte Crystal Frost White Light Weight 15mm (4)
    Project uses 4 pieces. You will need 1 package.

  • BCP-4362 - Lucite Bell Flowers Matte Rose Beadcaps 10mm (15)
    Project uses 2 pieces. You will need 1 package.

  • BMB-6459 - Bright Silver Plated Cone Flower Bead Caps 6mm x 3.5mm (50)
    Project uses 4 pieces. You will need 1 package.

  • CHA-98830 - Silver Plated Teardrop Krinkle Chain 2mm Bulk By The Foot
    Project uses 1 foot. You will need 1 package.

  • FCO-9005 - Silver Plated Hair Pins - Fun Craft Beading Project - Bridal - 4 Inches (10)
    Project uses 1 piece. You will need 1 package.

  • FHP-5315 - Silver Plated Head Pins 1.5 Inches Long 22 Gauge Thick (50 Pieces)
    Project uses 6 pieces. You will need 1 package.

  • FHP-6266 - Silver Plated Open Eye Pins 22 Gauge 1.5 Inch (x50)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5130 - Silver Plated Open Jump Rings 3mm (x100)
    Project uses 4 pieces. You will need 1 package.

  • FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
    Project uses 1 piece. You will need 1 package.

  • SWBI-1400 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Crystal
    Project uses 2 pieces. You will need 1 package.

  • SWBI-14064 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Rosaline
    Project uses 4 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
Additional Information
Theme Spring, Special Occasion, Easter, Bridal
Ingredients BCP-4332, BCP-4348, BMB-6459, CHA-98830, FHP-5315, FJR-5130, FJR-5454,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Lucite Bell Flowers Matte Ligtht Rose Pink Light Weight 20mm (4 pcs)
You will need 1 package(s).
1 package = 4 Pieces.
$3.09 / Package | SKU: BCP-4332
Lucite Bell Flowers Matte Crystal Frost White Light Weight 15mm (4 pcs)
You will need 1 package(s).
1 package = 4 Pieces.
$2.29 / Package | SKU: BCP-4348
Bright Silver Plated Cone Flower Bead Caps 6mm x 3.5mm (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$3.49 / Package | SKU: BMB-6459
Silver Plated Teardrop Krinkle Chain, 2mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$4.25 / Package | SKU: CHA-98830
Head Pins, 1.5 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$2.69 / Package | SKU: FHP-5315
Silver Plated Open Jump Rings 3mm (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$6.99 / Package | SKU: FJR-5130
Silver Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.49 / Package | SKU: FJR-5454
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Wire Looping Pliers - Concave And Round Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed