Czech glass dagger beads with laser etched design.
Czech pressed glass beads are manufactured by heating a rod of glass until molten and pressing into molds where it is stamped and holes are pierced. The beads are then rolled in hot sand to soften seam lines and remove flash.
These dagger shaped beads are side-drilled at the top. The surface of these beads feature a metallic iridescent finish with a laser etched insect wing design.
Color: Yellow Opaque : Opaque yellow with an iridescent blue design.
Measurements: Measurements: 16mm long, 5mm wide at the widest point, 3.5mm thick at thickest point. Hole is less than 1mm in diameter.