Green Sea Goddess Necklace and Earring Set

PROJECT S2018
Designer: Kat Silvia
Skill Level: Intermediate
Delicate gemstone chain with nautical charms makes this the perfect jewelry set for summer.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures 16.5 inches. To adjust the length, you will need to purchase additional length of gemstone chain.
  1. Begin by cutting the gemstone chain for the necklace. You will need a length of 16 inches. Be sure not to cut the last loop of the final gemstone on each side.
  2. Next open one jump ring and attach it to one end of the chain and to one lobster clasp. Close the jump ring. Onto the other side of the necklace, open another jump ring and attach it to the last loop. Close the jump ring.
  3. To complete the necklace, open one jump ring and attach it around the center of the gemstone chain and to the large shell pendant. Close the jump ring.
  4. For the earrings, cut 1.5 inches of the gemstone chain. If you want them to hang longer, you will need to purchase additional length of the chain. When you cut these lengths, keep the final loops in tact with one dangle attached.
  5. Open one jump ring and attach it to one starfish charm and to the bottom of the chain. Close the jump ring. Repeat on the second earring.
  6. Finally, open the loop of the earring hook, same as you would a jump ring and attach it to the top loop of the gemstone chain. Close the loop of the earring hook and repeat on the second earring.
Please note that the recommended length of gemstone chain is longer to accommodate the few links you will lose as you cut the chain. You can use the scrap gemstones for other projects.

WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHX-1045 - Wire Wrapped Gemstone Chain, Green Chalcedony Rondelles, Gold Vermeil, by the Inch
    Project uses 22 Inches. You will need 22 packages.

  • PNT-182 - Pewter Charm, Starfish 13mm, Antiqued Gold Plated, 2 Pieces, By TierraCast
    Project uses 2 pieces. You will need 1 package.

  • PNT-188 - Pewter Pendant, Scallop Shell 30.5mm, Antiqued Gold Plated, 1 Piece, By TierraCast
    Project uses 1 piece. You will need 1 package.

  • FCL-2210 - 14K Gold Filled Straight Lobster Clasp 10mm (x1)
    Project uses 1 piece. You will need 1 package.

  • FEA-1217 - 14K Gold Filled Bass Clef Ear Wire 21mm Long 20 Gauge Thick (4 Pieces)
    Project uses 2 pieces. You will need 1 package.

  • FJR-03055 - 14K Gold Filled Open Jump Rings 5mm 21 Gauge (10)
    Project uses 5 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
Additional Information
Theme Summer, Nautical
Ingredients CHX-1045, PNT-182, PNT-188, FCL-2210, FEA-1217, FJR-03055,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Wire Wrapped Gemstone Chain, Green Chalcedony Rondelles, Gold Vermeil (1 inch)
You will need 22 package(s).
1 package = By The Inch.
$1.89 / Package | SKU: CHX-1045
You will need 1 package(s).
1 package = .
/ Package | SKU: PNT-182
Pewter Pendant, Scallop Shell 30.5mm, Antiqued Gold Plated, By TierraCast (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$5.39 / Package | SKU: PNT-188
Lobster Clasps, Straight 10mm, 14K Gold-Filled (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$4.87 / Package | SKU: FCL-2210
Earring Findings, Ear Wire 21mm Long 20 Gauge Thick Gold-Filled (2 Pairs)
You will need 1 package(s).
1 package = 2 Pairs.
$6.29 / Package | SKU: FEA-1217
14K Gold-Filled Open Jump Rings 5mm 21 Gauge (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$9.99 / Package | SKU: FJR-03055
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed