Retired - Annalisa Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by watching the video on How to Use the Vintaj Relief Block.
2. Following what you learned in the video, use the side of your Vintaj relief block to sand the raised areas of your Vintaj stampings to show off the detail. Set the stampings aside for now.
3. Open the loop at the bottom of your earring hook (how you would a jump ring) and slide on the top loop from your Vintaj chandelier drop charm. Close the loop back up.
4. Next, open up a jump ring with your flat nose pliers and slide on the loop from one Vintaj long drop charm and also the bottom left loop of your Vintaj chandelier drop charm. Close the jump ring.
5. Open another jump ring and repeat the above step with your second Vintaj long drop and the bottom right loop from your Vintaj chandelier drop charm. Close the jump ring.
6. Next, take a 3� brass headpin and slide on the following: 1 Jet Black teardrop bead, 1 Olivine bicone bead, 1 Jet Black teardrop bead, 1 Olivine bicone bead, 1 Jet Black teardrop bead and 1 Olivine bicone bead.
7. Once all the beads are on, create a simple wire loop with your round nose pliers. Snip off any excess wire with your flush cutters. (LINK)
8. Open the simple wire loop (like you would a jump ring) and slide it onto the middle loop of your Vintaj chandelier drop charm and close.
9. You're done.

• PND-7113 - Vintaj Natural Brass Ornate Long Etched Dangle Drop Charms 36mm (2)
  Project uses 4 pieces. You will need 2 packages.


• PND-7340 - Vintaj Natural Brass Metamorphis Chandelier Drop Charms 35.5mm (2)
  Project uses 2 pieces. You will need 1 package.


• BCZ-5646 - Preciosa Czech Crystal Beads 6mm Bicone 'Olivine' Green (20)
  Project uses 6 pieces. You will need 1 package.


• BCP-5802 - Czech Fire Polished Glass Beads 8 x 6mm Teardrop Jet Black (20)
  Project uses 6 pieces. You will need 1 package.


• FJR-5471 - Antiqued Brass Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 6 pieces. You will need 1 package.


• FEA-3310 -
  Project uses 2 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
• XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding